+- RoboDK Forum (//www.sinclairbody.com/forum)
+-- Forum: RoboDK (EN) (//www.sinclairbody.com/forum/Forum-RoboDK-EN)
+ - - -论坛:通用RoboDK问题(//www.sinclairbody.com/forum/Forum-General-questions-about-RoboDK)
+--- Thread: KUKA KR6 R900 - Error rurnning the KUKA Driver Auto Config script (/Thread-KUKA-KR6-R900-Error-rurnning-the-KUKA-Driver-Auto-Config-script)
KUKA KR6 R900 - Error rurnning the KUKA Driver Auto Config script-lmd168-06-19-2023
Hi there, currently getting an Error (unable to finish writing $config.dat) 5/6 commands successfully completed while running the KUKA Driver Auto Config script with RoboDK.
I have a KUKA KR6 R900
Running RoboDK v5.6.1.23473 (64 bit)
Controller: KR C4 Compact
If anyone could provide assistance I'd be appreciated, cheers.
RE: KUKA KR6 R900 - Error rurnning the KUKA Driver Auto Config script-Dmitry-06-19-2023
Hi lmd168,
Unfortunately, sometimes the control system refuses to overwrite this file without explanation.
We are working to ensure that automatic configuration is successful in 100% of cases.
In your case I suggest using the manual configuration://www.sinclairbody.com/doc/en/Robots-KUKA-Manual-configuration.html#ManualDriverConfig
RE: KUKA KR6 R900 - Error rurnning the KUKA Driver Auto Config script-lmd168-06-20-2023
(06-19-2023, 08:11 AM)Dmitry Wrote:Hi lmd168,
Unfortunately, sometimes the control system refuses to overwrite this file without explanation.
We are working to ensure that automatic configuration is successful in 100% of cases.
In your case I suggest using the manual configuration://www.sinclairbody.com/doc/en/Robots-KUKA-Manual-configuration.html#ManualDriverConfig
No worries, thanks Dmitry I'll give that a go cheers!