RoboDK Forum
Imported 3d Objects Palletizing- Printable Version

+- RoboDK Forum (//www.sinclairbody.com/forum)
+-- Forum: RoboDK (EN) (//www.sinclairbody.com/forum/Forum-RoboDK-EN)
+--- Forum: General questions about RoboDK (//www.sinclairbody.com/forum/Forum-General-questions-about-RoboDK)
+--- Thread: Imported 3d Objects Palletizing (/Thread-Imported-3d-Objects-Palletizing--6824)



Imported 3d Objects Palletizing-StefanoCava-06-07-2023

Hi everyone, I'm having some trouble dealing with 3d imported objects and the palletizing plugin.
When I displace the mesh on the pallet through the plugin gui, sometimes my object becomes red even though it is seemingly reachable.
The other issue I have is that, after having generated the program, the robot drops the object out of the pallet, in a different place from the one I chose.
I'm wondering if the object must have some kind of specific requirement I'm missing.

If I use the "Create Object" tab instead of the "Select Model Object" one it works fine.

Do you have any advice on how I can fix that? I attach a simple example if it can help you figure it out.
Thanks!


RE: Imported 3d Objects Palletizing-StefanoCava-07-03-2023

Hi there, news?


RE: Imported 3d Objects Palletizing-Albert-07-03-2023

Sorry for the delays. @Phillipcan help you better next week as he is currently on vacation.


RE: Imported 3d Objects Palletizing-StefanoCava-07-20-2023

Hi, any update?


RE: Imported 3d Objects Palletizing-Phillip-07-24-2023

你确保obje下更多的选择cts geometry is applied and that the numbers under Move Geometry section of the objects parameters are 0? Not doing this breaks some features that rely on object position in robodk.


RE: Imported 3d Objects Palletizing-StefanoCava-07-27-2023

Yes, I checked it and it seems correct to me. If you have other clues please let me know.
By chance, is there a way to fill the box x, y and z sizes in the "Create Object" tab through the API?


RE: Imported 3d Objects Palletizing-Phillip-07-27-2023

Hello, currently the parameters of the plugin are saved in the item via a binary format in the item, you can technically retrieve that data via the api and modify it, but binary formats are inherently undocumented and hard to understand. My intention was always to redo that format and replace it with a json string so that people could easily modify and set any parameter and even future parameters via the api, it just wasn't a priority.

Because of your request we've pushed up that tasks priority and I should get to in the next two weeks.


RE: Imported 3d Objects Palletizing-StefanoCava-07-28-2023

That's great news! Thank you Phillip


RE: Imported 3d Objects Palletizing-StefanoCava-08-25-2023

Hi! I just saw in the release notes of the latest RoboDK version that the palletizing plugin was updated... Has it something to do with this thread? If so, is there some doc available?