+- RoboDK Forum (//www.sinclairbody.com/forum)
+-- Forum: RoboDK (EN) (//www.sinclairbody.com/forum/Forum-RoboDK-EN)
+ - - -论坛:通用RoboDK问题(//www.sinclairbody.com/forum/Forum-General-questions-about-RoboDK)
+--- Thread: RoboDK can not connect with FANUC ROBOT RJ3ib controller! (/Thread-RoboDK-can-not-connect-with-FANUC-ROBOT-RJ3ib-controller)
RoboDK can not connect with FANUC ROBOT RJ3ib controller!-dang huu tri-02-02-2023
嗨！
I am connecting robodk with fanuc robot Rj3ib, i have downloaded necessary drivers and files (go_mj, go_pro, go_ml, go_mls,RDK_S3.pc). The driver file I used is from the v6v7v8 folder, I also installed the options on the robot, (pc interface, user socket message, karel, ascii upload) , but when loading the above files into the robot, the robot reported an error with the file RDK_S3 version too New, and the file go_pro.tp have error.
The fanuc robot I'm using is version 6.4 RJ3ib M6ib
Can you help me connect fanuc Rj3ib with robodk so i can calibrate tool robot using twintool ?
I have contacted Alex several times about this issue via email asking for help, but he has not responded.