+- RoboDK Forum (//www.sinclairbody.com/forum)
+-- Forum: RoboDK (EN) (//www.sinclairbody.com/forum/Forum-RoboDK-EN)
+ - - -论坛:通用RoboDK问题(//www.sinclairbody.com/forum/Forum-General-questions-about-RoboDK)
+--- Thread: External axis speed (/Thread-External-axis-speed)
External axis speed-NikhilMan-02-04-2022
Hi,
I have a Motoman ma2010 robot along with a B1L-1500-2500 Positioner. I have synchronized them and I want to change the speed of the positioner. How can I change it?
I have tried adding instructions in the program and also changed the parameters, but only the robot is affected not the external axis.
I have added the screenshot where you can see the external axis remains 100.
with regards,
Nikhil
RE: External axis speed-Jeremy-02-08-2022
I just ask the dev who did this post-processor to take a look.
It will be possible, we just have to figure out the right way of doing it.
Jeremy
RE: External axis speed-NikhilMan-02-11-2022
Hi Jeremy,
did you get the information?
with regards,
Nikhil Maniyanthotil
RE: External axis speed-Phillip-02-11-2022
Hello,
I've added a new hook to the post processor for motoman so you can modify the speed of the rail, in order to use this new version, copy the attached files to C:\RoboDK\Posts and overwrite their corresponding versions from your version of robodk. This post also relies on changes to the robodk api in a fairly recent version so I would suggest you update robodk first.
You can change the speed by adding a program call with the special keyword of "speedEx" to set the external axis's speed from 0 to 100% for the next movements. This will change the speed generated for the subsequent moves.
See the attached image for an example usage of the program call.
Thank you,
Phillip May
RE: External axis speed-NikhilMan-02-22-2022
Hi Jeremy and Phillip,
Thank you!
The program call works for changing the speed of the positioner.
with regards,
Nikhil Kumar Maniyanthotil