+- RoboDK Forum (//www.sinclairbody.com/forum)
+-- Forum: RoboDK (EN) (//www.sinclairbody.com/forum/Forum-RoboDK-EN)
+ - - -论坛:通用RoboDK问题(//www.sinclairbody.com/forum/Forum-General-questions-about-RoboDK)
+--- Thread: Tools>Measure (/Thread-Tools-Measure)
Tools>Measure-lmarkie74-01-18-2022
Can the Measure Tool be used to measure from a Frame to and Object (Plane, Line, etc.)?
RE: Tools>Measure-Jeremy-01-18-2022
Not now, unfortunately.
I already asked for this to be added, but I would recommend you to create a post in the "Request new features" section of the forum.
Jeremy
RE: Tools>Measure-lmarkie74-02-02-2022
(01-18-2022, 10:07 PM)Jeremy Wrote:Not now, unfortunately.
I already asked for this to be added, but I would recommend you to create a post in the "Request new features" section of the forum.
Jeremy
Jeremy,
我是wanting to move a corner of an object (ELMA Frame) to frame that I have calibrated with the robot. Is it possible to do this?
https://vimeo.com/672865207/27ea0226fe
RE: Tools>Measure-Jeremy-02-02-2022
OK, I will recommend you to take a look at a few videos, or sections of videos in fact:
First, this chapter:https://youtu.be/NYFBpRQQc74?t=291
Follow by this example:https://youtu.be/fIEtfhCnQKQ?t=400
And these videos:https://youtu.be/fmLeCEv1grs
https://youtu.be/6SArydO_Qa8
Jeremy