RoboDK Forum
How to make a gripper tool from a mechanism- Printable Version

+- RoboDK Forum (//www.sinclairbody.com/forum)
+-- Forum: RoboDK (EN) (//www.sinclairbody.com/forum/Forum-RoboDK-EN)
+ - - -论坛:基因ral questions about RoboDK (//www.sinclairbody.com/forum/Forum-General-questions-about-RoboDK)
+--- Thread: How to make a gripper tool from a mechanism (/Thread-How-to-make-a-gripper-tool-from-a-mechanism)



How to make a gripper tool from a mechanism-fennex-04-09-2020

I've created a simple 1 axis gripper (1 body, 1 sliding jaw) mechanism.

我如何创建一个工具呢?
Similar to the robotiq 2f85 found in the library?
And with the gripper icon?

Thanks.


RE: How to make a gripper tool from a mechanism-Jeremy-04-10-2020

Hi Fennex,

This webinar should help you:
https://www.youtube.com/watch?v=HN9bHHGyVOk

Jeremy


RE: How to make a gripper tool from a mechanism-jchang-07-22-2022

(04-09-2020, 02:57 PM)fennex Wrote:I've created a simple 1 axis gripper (1 body, 1 sliding jaw) mechanism.

我如何创建一个工具呢?
Similar to the robotiq 2f85 found in the library?
And with the gripper icon?

Thanks.

Did you end up figuring out how?


RE: How to make a gripper tool from a mechanism-Albert-07-22-2022

We recently improved our documentation to explain how you can create a 2-finger gripper:
//www.sinclairbody.com/doc/en/General.html#Model2F