Posts: 9
Threads: 3
Joined: Apr 2020
Reputation:
0
Hello Team
Have you had any feedback on connecting a DOBOtCR5with robodk?
If so, do you have the procedure for connecting or transferring the program
Thanks in advance
Ned
Posts: 1,832
Threads: 2
Joined: Oct 2018
Reputation:
72
Hi Ned,
There is a DobotDriver in the folder "C:/RoboDK/api/Robot.
This means that it should be possible to connect to the robot.
I personally never tried it with a Dobot, but for other brands it's pretty much as simple as:
1- Right-click the robot -> "Connect to the robot".
2- Enter the right IP address and verify if you can "ping" the controller.**
3- Then "Connect".
**But the Dobot seems to be using a COM port (COM4) by default and not Ethernet IP.
Did you try that?
Jeremy
Posts: 9
Threads: 3
Joined: Apr 2020
Reputation:
0
Hello Jeremy Sorry for the delay in my response we will test the support this week
Thank you
Ned
Posts: 9
Threads: 3
Joined: Apr 2020
Reputation:
0
Hello Jeremy
We manage to get a connection with theCR5DOBOT robot. But we are unable to move or transfer the program to the robot.
Can we organize a videoconference to help us ?
Thanks
Ned
Posts: 1,832
Threads: 2
Joined: Oct 2018
Reputation:
72
I'm already fully booked this week.
You can send me an email directly for more support.
Jeremy