12-09-2021, 01:36 PM
Hi there,
I would like to mill very large parts with a robot, the first roughing program consists of 3,500,000 points. The path update of the first processing takes a very long time, approx. 1.5 hours without a collision check. With a collision check, it's a never-ending story. But I would like to carry out a collision check for every milling project. It took me days to calculate my first test project to calculate this. I milled faster than the program calculated.
I have activated "Cuda" in the settings, but when I open the system monitor of the graphics card for a calculation, I see no utilization. I have to do the calculations faster, a lot faster.
,
I found this in the forum//www.sinclairbody.com/forum/Thread-Video-ca...erformance
Is there a special version of Robodk for the Cuda calculation?
Here is information about my PC:
Intel ® Core ™ i7-8700K CPU @ 3.70GHz 3.70 GHz
64.0 GB of RAM
Graphics Nvidia M2000
I work with RoboDK version 5.2.1, this is the newest version that I can use because my license runs through Hexagon's WorkNC.
I would be very grateful for any help.
Marcus
I would like to mill very large parts with a robot, the first roughing program consists of 3,500,000 points. The path update of the first processing takes a very long time, approx. 1.5 hours without a collision check. With a collision check, it's a never-ending story. But I would like to carry out a collision check for every milling project. It took me days to calculate my first test project to calculate this. I milled faster than the program calculated.
I have activated "Cuda" in the settings, but when I open the system monitor of the graphics card for a calculation, I see no utilization. I have to do the calculations faster, a lot faster.
,
I found this in the forum//www.sinclairbody.com/forum/Thread-Video-ca...erformance
Is there a special version of Robodk for the Cuda calculation?
Here is information about my PC:
Intel ® Core ™ i7-8700K CPU @ 3.70GHz 3.70 GHz
64.0 GB of RAM
Graphics Nvidia M2000
I work with RoboDK version 5.2.1, this is the newest version that I can use because my license runs through Hexagon's WorkNC.
I would be very grateful for any help.
Marcus