[lmd168]

Hi there, currently getting an Error (unable to finish writing $config.dat) 5/6 commands successfully completed while running the KUKA Driver Auto Config script with RoboDK.

I have a KUKA KR6 R900

Running RoboDK v5.6.1.23473 (64 bit)
Controller: KR C4 Compact

If anyone could provide assistance I'd be appreciated, cheers.

[Dmitry]

Hi lmd168,
Unfortunately, sometimes the control system refuses to overwrite this file without explanation.
We are working to ensure that automatic configuration is successful in 100% of cases.
In your case I suggest using the manual configuration://www.sinclairbody.com/doc/en/Robots-KUKA-Ma...iverConfig

[lmd168]

Hi lmd168,
Unfortunately, sometimes the control system refuses to overwrite this file without explanation.
We are working to ensure that automatic configuration is successful in 100% of cases.
In your case I suggest using the manual configuration://www.sinclairbody.com/doc/en/Robots-KUKA-Ma...iverConfig

No worries, thanks Dmitry I'll give that a go cheers!