06-05-2023, 08:48 AM
Hi everyone, I'm having some trouble dealing with 3d imported objects and the palletizing plugin.
When I displace the mesh on the pallet through the plugin gui, sometimes my object becomes red even though it is seemingly reachable.
The other issue I have is that, after having generated the program, the robot drops the object out of the pallet, in a different place from the one I chose.
I'm wondering if the object must have some kind of specific requirement I'm missing.
If I use the "Create Object" tab instead of the "Select Model Object" one it works fine.
Do you have any advice on how I can fix that?
Thanks!
When I displace the mesh on the pallet through the plugin gui, sometimes my object becomes red even though it is seemingly reachable.
The other issue I have is that, after having generated the program, the robot drops the object out of the pallet, in a different place from the one I chose.
I'm wondering if the object must have some kind of specific requirement I'm missing.
If I use the "Create Object" tab instead of the "Select Model Object" one it works fine.
Do you have any advice on how I can fix that?
Thanks!