Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Action ckecksum failed (Robotdk_Driver_Socket)

#1
I'm trying to program online an ABB SCARA Robot (910-500278). I already run the module on the scara robot (Robotdk_Driver_Socket) and I got to connect with this one using RobotDK. As soon as I execute the first online movement, the module get stuck in the following message: "Action checksum failed, program paused, errors will follow". Image attached. Does anyone know why this is happening?

I didn't have any problems at all working with another ABB Robot (1200-800124).

I


Attached Files Thumbnail(s)

#2
(06-22-2020, 04:43 PM)danield271 Wrote:I'm trying to program online an ABB SCARA Robot (910-500278). I already run the module on the scara robot (Robotdk_Driver_Socket) and I got to connect with this one using RobotDK. As soon as I execute the first online movement, the module get stuck in the following message: "Action checksum failed, program paused, errors will follow". Image attached. Does anyone know why this is happening?

I didn't have any problems at all working with another ABB Robot (1200-800124).

I

It seems the module is not able to recognize that the SCARA robot has 4 different joints (image attached).


Attached Files Thumbnail(s)

#3
The problem was solved by adding 4 temporary variables at the end of the "COM_ReadJoints" function since there was a buffer that caused problems in the data communication process (image attached).


Attached Files Thumbnail(s)

#4
Hi Daniel,

Thanks for pointing out this issue, I'll make sure our dev team is aware of the situation.

Jeremy




Users browsing this thread:
1 Guest(s)