05-25-2021, 03:50 PM
Hi Jeremy, thanks for getting back to me so quickly.
我目前的操作under the assumption that the easiest way to configure an extruder for 3d printing is by modifying the appropriate post-processor in order to define extrusion rates, analog out ID #'s etc. When I navigate to Program --> Add/Edit Post Processor and open the ABB IRC5 processor, I can only seem to access the following screen:
Upon browsing the forums, I came acrossthis threadwhich seems to indicate that post processor source code is no longer included with RoboDK by default, and must be requested.
我目前的操作under the assumption that the easiest way to configure an extruder for 3d printing is by modifying the appropriate post-processor in order to define extrusion rates, analog out ID #'s etc. When I navigate to Program --> Add/Edit Post Processor and open the ABB IRC5 processor, I can only seem to access the following screen:
Upon browsing the forums, I came acrossthis threadwhich seems to indicate that post processor source code is no longer included with RoboDK by default, and must be requested.