01-20-2021, 05:20 PM
Hi Rodolfo,
If you are experiencing this issue, you should be able to use "ToolXYZ" and get the right result.
Otherwise, you can create a new TCP on the robot and keep its position at [0,0,0] and use the POSXYZ.
Worst case scenario, you can also just do the TCP calibration using the robot controller procedure and manually transfer the values to RDK afterward.
Jeremy
If you are experiencing this issue, you should be able to use "ToolXYZ" and get the right result.
Otherwise, you can create a new TCP on the robot and keep its position at [0,0,0] and use the POSXYZ.
Worst case scenario, you can also just do the TCP calibration using the robot controller procedure and manually transfer the values to RDK afterward.
Jeremy
Find useful information about RoboDK and its features by visiting our2022世界杯32强赛程表时间
and by watching tutorials on ourYoutube Channel.