01-07-2021, 03:31 PM
Hi DKeretic,
You can save robots or mechanisms as .robot, readable with roboDK.
At the moment, you can only export objects from RoboDK in .stl or .sld, however if you have SolidWorks you can open the .stl and re-save as step if needed.
Olivier
You can save robots or mechanisms as .robot, readable with roboDK.
At the moment, you can only export objects from RoboDK in .stl or .sld, however if you have SolidWorks you can open the .stl and re-save as step if needed.
Olivier