12-29-2020, 09:29 PM
Hi Sinan,
You need to import them in step214, one part at a time, but all with the base of the robot as an origin.
What I generally do is open my assembly in SW, hide or suppress all parts but the base, save as step named Robot - Base.
Then show/unsuppressed joint 1 and hide/suppress the base, save as step name Robot - J1.
Etc.
When you import to RDK afterward, they should line up properly.
Jeremy
You need to import them in step214, one part at a time, but all with the base of the robot as an origin.
What I generally do is open my assembly in SW, hide or suppress all parts but the base, save as step named Robot - Base.
Then show/unsuppressed joint 1 and hide/suppress the base, save as step name Robot - J1.
Etc.
When you import to RDK afterward, they should line up properly.
Jeremy
Find useful information about RoboDK and its features by visiting our2022世界杯32强赛程表时间
and by watching tutorials on ourYoutube Channel.