01-30-2020, 08:49 PM
Hi woodsbs,
Hope you are well.
刀位点,本身包含的方向tool. Seems like your CAM (Machining) software is creating 3-axis G-Code. In this case, the orientation is normal to the XY plane of the machining frame.
If you want the orientation to be normal to the surface, you need to create 5-axis G-Code.
I'm not aware of a way to improve 3-axis G-Code to 5-axis G-Code.
@Albert: Can you confirm?
Hope you are well.
刀位点,本身包含的方向tool. Seems like your CAM (Machining) software is creating 3-axis G-Code. In this case, the orientation is normal to the XY plane of the machining frame.
If you want the orientation to be normal to the surface, you need to create 5-axis G-Code.
I'm not aware of a way to improve 3-axis G-Code to 5-axis G-Code.
@Albert: Can you confirm?