08-14-2019, 02:48 PM
Hey. I have a similar problem with KRC4 compact. I connected the network interface to the KLI port and the port on the motherboard. When connected to the KLI port, 2 IP addresses are pinged:
172.17.255.1 - Used to connect WorkVisual (the PC receives IP in this IP range 172.17.255.x)
172.31.1.147 - the IP address appearing in different manuals as the KLI address of the interface and specified in the HMI settings (for some reason, ping is stable only after the first connection it can break off later)
But in none of these cases it fails to connect to KUKAVARPROXY. I tested both RoboDK and apikuka. What could be wrong? I'm interested in the capabilities of RoboDK and I can’t check them ...
Thank you in advance.
172.17.255.1 - Used to connect WorkVisual (the PC receives IP in this IP range 172.17.255.x)
172.31.1.147 - the IP address appearing in different manuals as the KLI address of the interface and specified in the HMI settings (for some reason, ping is stable only after the first connection it can break off later)
But in none of these cases it fails to connect to KUKAVARPROXY. I tested both RoboDK and apikuka. What could be wrong? I'm interested in the capabilities of RoboDK and I can’t check them ...
Thank you in advance.