10-12-2022, 05:37 PM
That's because you must have clicked on "Teach" in one station and not in the other.
If you press the little "+" sign on the side on the "Teach" you will see that both "Preferred orientation" are not the same.
If you activate the "Show preferred tool path" in both cases, you will see the tool is not oriented the same.
Using the default value of "Preferred tool X axis 90 deg (green) 180 deg (blue)" with a "rotx(180)" should give you something close to what you are looking for.
Jeremy
If you press the little "+" sign on the side on the "Teach" you will see that both "Preferred orientation" are not the same.
If you activate the "Show preferred tool path" in both cases, you will see the tool is not oriented the same.
Using the default value of "Preferred tool X axis 90 deg (green) 180 deg (blue)" with a "rotx(180)" should give you something close to what you are looking for.
Jeremy
Find useful information about RoboDK and its features by visiting our2022世界杯32强赛程表时间
and by watching tutorials on ourYoutube Channel.