[lehoanganhtai]

Not sure that I understand.
Let see if I'm following.
You created a program using RoboDK for your Motoman robot.
You generate the .JBI file and uploaded it on the controller successfully. Are you able to run it?

Then you talk about downloading it. Do you mean extracting the program from the robot and accessing it on your computer?

Jeremy

Yes, I generated a .JBI file from a program using RoboDK, uploaded it to the controller by Filezilla, and successfully ran the program. The problem is that I suspect that there is something wrong with the .JBI file generated from RoboDK, because I couldn't rename the job manually using the controller, and I couldn't delete or download it from the controller to the PC using Filezilla. It showed that "550 not found". I can do everything with the program created directly on the controller but not for the one from RoboDK.

I opened the .JBI file of both generated from RoboDK and the controller on the computer to see if there was anything wrong, but there was not much difference between them, but why I couldn't do anything with the one from RoboDK using FileZilla except upload it. I also tried using your RoboDK to transfer the program for testing, but it failed since it couldn't remove the jobs, which were generated earlier from RoboDK and uploaded manually to the controller, for space.

Hope to hear from you soon!