08-18-2022, 02:24 PM
Hello,
I imported a curve in RoboDK and followed it thanks to the "Curve Following Project" function.
I generated a Kuka program with the KUKA KRC4
QuestionForum.rdk(Size: 516.15 KB / Downloads: 94)DAT post processor, and played it on the real robot.
在玩它,我发现它会更好change a little the curve position.
I changed the curve pose in RoboDK, updated the "Curve Following Project" and simulated it. All was OK.
The problem comes when I generate the Kuka program a new time: the curve coordonates remains the same as in the first generated program ...
The coordonates are not in Frame 5 as expectedbut seems to be always in another Frame I don't succed to identify.
I tried a lot of things during a long time, but no way, the generated .dat file remains always the same as the first generated program whatever the curve pose is. The simulation updates correctly, but not the generated program.
Maybe it is not a bug. In this case it means that I missed something and I would appreciate your help.
I attached the my bugged RoboDK file. Could you please help me with this ?
Thanks in advance.
I imported a curve in RoboDK and followed it thanks to the "Curve Following Project" function.
I generated a Kuka program with the KUKA KRC4
QuestionForum.rdk(Size: 516.15 KB / Downloads: 94)DAT post processor, and played it on the real robot.在玩它,我发现它会更好change a little the curve position.
I changed the curve pose in RoboDK, updated the "Curve Following Project" and simulated it. All was OK.
The problem comes when I generate the Kuka program a new time: the curve coordonates remains the same as in the first generated program ...
The coordonates are not in Frame 5 as expectedbut seems to be always in another Frame I don't succed to identify.
I tried a lot of things during a long time, but no way, the generated .dat file remains always the same as the first generated program whatever the curve pose is. The simulation updates correctly, but not the generated program.
Maybe it is not a bug. In this case it means that I missed something and I would appreciate your help.
I attached the my bugged RoboDK file. Could you please help me with this ?
Thanks in advance.