[giedrius9999]

Unbelievable!!! ...total control of toolpath!... many thanks Jeremy for so clear explanation!
...would be possible to access the library also and later? ...a lot of interesing topics very well explained

---

Hello giedrius,[url=//www.sinclairbody.com/forum/User-giedrius9999][/url]

我可以问你请分享射流开/关吗scripts as an example to use CS8 IO ports? The robok team did not implemented yet a working solution to use the dio on cs8 controller.

Thank you in advance,
Eduard


Hello Eduard,

Waterjet ON/OFF scripts are only changed names form examples of tutorials, not implemented yet...when they will be finished i will share.
After generating code from robodk to VAL3 I control dio/aio from VAL3 code inserting additional rows manually.

Best,
Giedrius

may I as

asfasf

There are many ways to do this.

One of them is in your Curve Follow Project, you can add path to tool offset.

Hi Alex,

many thanks for this!
Could I adjust the tool attack angle on the same toolpath for two or more segments differently (please see the picture, lets say -15° and 15°) ?