Dear Robodk Team and community,
I have found a little bug connecting to Epson-LS3-401S. The end positions are set wrong by default. The home position is at 90 0 0 0, but the limit degrees are set to -132 to +132, so the rotation is allowed to one site for 42degree and the other 222. I made it to work with repaired -132+90 and +132+90 degrees, but it is weird.
I have an assembly file that I have to import with a lot of cylindrical parts (to do pick and place action with them). I am using Solid edge for modeling. After several tries of import (iges, STP 242 and 214 and 203) every time I got the "Loading finished" message, but models haven't appeared. (I turned on the "ask for assembly vs part" option and tried fast and default too). I am not sure about a pattern option in it, but another option is to write a script to place them in the right place.
I am linking some pictures about the problems, and the assembly step file.
Thank you in advance
I have found a little bug connecting to Epson-LS3-401S. The end positions are set wrong by default. The home position is at 90 0 0 0, but the limit degrees are set to -132 to +132, so the rotation is allowed to one site for 42degree and the other 222. I made it to work with repaired -132+90 and +132+90 degrees, but it is weird.
I have an assembly file that I have to import with a lot of cylindrical parts (to do pick and place action with them). I am using Solid edge for modeling. After several tries of import (iges, STP 242 and 214 and 203) every time I got the "Loading finished" message, but models haven't appeared. (I turned on the "ask for assembly vs part" option and tried fast and default too). I am not sure about a pattern option in it, but another option is to write a script to place them in the right place.
I am linking some pictures about the problems, and the assembly step file.
Thank you in advance