[GMuld]

I am using roboDK for a couple of weeks now and since I installed it is crashes a lot. First I thought it was due to the test license, but the same thing happens with the full license as well.

I tried it on two different mac's with the same issues.
And installed the newest version downloaded and installed today.

I ran "/RoboDK/RoboDK-Debug.sh"with the following error:
22:40:45.587 (+2710 ms): Debug: Adding new docked window: "Frame Details: Rotation Base"
22:40:45.588 (+1 ms): Warning: QMainWindow::addDockWidget: invalid 'area' argument
/Applications/RoboDK/RoboDK-Debug.sh: line 3: 51840 Segmentation fault: 11 ./RoboDK -DEBUG

The crashes appear when I close a window, either "mechanism control panel" or "Frame details" window.
I hope this gives you enough information to explain me what to do and how to solve it.


谢谢!

[Albert]

Thank you for letting us know. We'll be looking at this issue in the next few days and we hope to fix it soon.

Albert

[GMuld]

Hi Albert,

Thanks for the update, please let me know if you need more information or if I need to try something.

Gertjan.

[Albert]

I was unable to reproduce this issue.
你能提供the complete log file?
Does it always happen or is this issue specific to a project?

[GMuld]

I noticed a specific moment when it happens.
It is all on closing windows and especially when the windows are not selected before closing.

Maybe that helps?
In the meantime I will create another logging file and sent it to you together with the other file (other question on forum)

谢谢!
Gertjan

[garram]

I too have experienced some crashes using RoboDK on a MAC.
A crash that I am able to repeat is as follows.
I created a simple MainProgram, added a 'Set Speed Instruction', and when I attempt to move the instruction among other programs, I immediately and consistently get a crash.
I ended up creating a SetSpeed program, with only a Set Speed Instruction, and placed it among other programs where I wanted it, then I created my MainProgram.

[Albert]

These issues should now be resolved for all platforms (Windows, Mac and Linux).

Let me know if you still see related issues and we'll fix them as soon as possible.

[GMuld]

Dear Albert,

Thanks for the update! I installed it and gave it a quick try. No issues in the first minutes. But after a while it freezes up again.
I'll make a logging like before later on.

谢谢!
Gertjan.

[Mohamed_ibrahim]

I was unable to reproduce this issue.
你能提供the complete log file?
Does it always happen or is this issue specific to a project?

robodk is craching alot while working on my project and here is the debug log file
the error message seems to be :

18:24:39.598 (+161 ms): Warning: QCoreApplication::postEvent: Unexpected null receiver
18:24:39.599 (+1 ms): Debug: Statusbar: "Program Machining1 interrupted."
18:24:39.607 (+8 ms): Debug: Moved to recycle bin: Item= "Machining1"
18:24:39.607 (+ 0 ms):调试:移动到回收站:Item= "Machining1 settings"
18:24:39.607 (+ 0 ms):调试:移动到回收站:Item= "Print"
18:24:39.607 (+ 0 ms):调试:移动到回收站:Item= "Run_3D_v2"
18:24:39.607 (+ 0 ms):调试:移动到回收站:Item= "Table"
18:24:39.607 (+ 0 ms):调试:移动到回收站:Item= "Robot Table"
18:24:39.611 (+4 ms): Debug: Moved to recycle bin: Item= "EndEffector"
18:24:39.611 (+0 ms): Debug: Moved to recycle bin: Item= "ABB IRB 120-3/0.6"
18:24:39.611 (+0 ms): Debug: Program update requested: "Machining1"
18:24:39.611 (+0 ms): Debug: Updating Program... "Machining1"
18:24:39.611 (+0 ms): Debug: Moved to recycle bin: Item= "ABB IRB 120-3/0.6 Base"
18:24:39.816 (+205 ms): Debug: Closing RoboDK ... Leaving a nullptr station
18:24:39.816 (+0 ms): Debug: Unloading plugin "CollisionFreePlanner"
18:24:39.816 (+0 ms): Debug: Closing tree window ...

hope you can help me with this error

---

I was unable to reproduce this issue.
你能提供the complete log file?
Does it always happen or is this issue specific to a project?

robodk is craching alot while working on my project and here is the debug log file
the error message seems to be :

18:24:39.598 (+161 ms): Warning: QCoreApplication::postEvent: Unexpected null receiver
18:24:39.599 (+1 ms): Debug: Statusbar: "Program Machining1 interrupted."
18:24:39.607 (+8 ms): Debug: Moved to recycle bin: Item= "Machining1"
18:24:39.607 (+ 0 ms):调试:移动到回收站:Item= "Machining1 settings"
18:24:39.607 (+ 0 ms):调试:移动到回收站:Item= "Print"
18:24:39.607 (+ 0 ms):调试:移动到回收站:Item= "Run_3D_v2"
18:24:39.607 (+ 0 ms):调试:移动到回收站:Item= "Table"
18:24:39.607 (+ 0 ms):调试:移动到回收站:Item= "Robot Table"
18:24:39.611 (+4 ms): Debug: Moved to recycle bin: Item= "EndEffector"
18:24:39.611 (+0 ms): Debug: Moved to recycle bin: Item= "ABB IRB 120-3/0.6"
18:24:39.611 (+0 ms): Debug: Program update requested: "Machining1"
18:24:39.611 (+0 ms): Debug: Updating Program... "Machining1"
18:24:39.611 (+0 ms): Debug: Moved to recycle bin: Item= "ABB IRB 120-3/0.6 Base"
18:24:39.816 (+205 ms): Debug: Closing RoboDK ... Leaving a nullptr station
18:24:39.816 (+0 ms): Debug: Unloading plugin "CollisionFreePlanner"
18:24:39.816 (+0 ms): Debug: Closing tree window ...

hope you can help me with this error

[Jeremy]

can you attach your .rdk station and quickly describe what you are working on / what features you are using?
Are you using RDK's latest version?

Jeremy