Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Failed to generate program using the Mitsubishi Post Processor

#1
Hi!

我创建了一个项目nd it to robot corectly from my computer, but when I tried to do this from two another computers I got some errors:

1) File "C:/Users/xxx/AppData/Local/Temp/PostProg1.py", line 58, in r.ProgSendRobot("192.168.0.20", "/", "", "")

2) File "C:\RoboDK\Posts\Mitsubishi.py", line 447, in ProgSendRobot AttributeError: 'list' object has no attribute 'lower'.

I don't know what I can do to fix this problem, especcially that I can send program from one computer with no problem.

Thanks for any help.
#2
We fixed the file transfer issue with the post processor attached. Can you try again and let us know if you see any issues?


Attached Files
.py Mitsubishi.py(Size: 4.35 KB / Downloads: 85)
#3
Unfortunely I have another error, when I replace files.

NameError: Name 'RobotCom' is not defined.
#4
Screen with actual errors (after replaced files).


Attached Files Thumbnail(s)

#5
Try please this modified version of the post-processor.

Place pleaseMitsubishi_mod.pyto the\RoboDK\Posts\
andMitsubishi_mod.cpython-37.pycto theC:\RoboDK\Posts\v37

I attached the files. If you have any issues, please let us know.


Attached Files
.py Mitsubishi_mod.py(Size: 2.24 KB / Downloads: 90)
.zip Mitsubishi_mod.cpython-37.zip(Size: 9.31 KB / Downloads: 71)
#6
I tried both the version from Albert which also leads to the RobotCom error and from Sergei which unfortunately leads again to the lower caser error from the original post. I switched to python 37 to get a smiliar setup.

Any hints what I might do wrong?

Thanks in advance
#7
This issue should have been fixed with the latest version of RoboDK.

Can you download the latest version of RoboDK?
//www.sinclairbody.com/download
#8
Thanks for the fast reply, I actually just yesterday downloaded and tried it with a mitsubishi RV-4, no files changed, just the original 5.6 clean install.
Could this have something to do with a different system python version? I have 3.10.5 installed.
Moving the joints worked the moment I switched to the system python version 310
#9
Do you mean you switched to Python 3.7? Are you still have the issue with RobotCom?
#10
Im sorry, my bad, i switched to 3.7 in robodk.. not 3.10
Moving the joints worked when I switched to 3.7 which came with robodk and not the systemversion which is 3.10

So with 3.7 selected as the interpreter and using sergeis files both .py and .pyc I end up with the "AttributeError: 'list' object has no attribute 'lower'"




Users browsing this thread:
1 Guest(s)