[奥立ndo]

Hello everyone!


I have defined a code called "Gefährdungserkennung". I use a main program that manipulates the trajectory of a robot to make a pick-and-place task safer. This main program contains a subroutine called "Gefährdungserkennung".


The problem is that I need to load .stl files into the subroutine. This does not work.

I tried using "mesh.Mesh.from_file('filename.stl') to load my .stl into the subroutine.

The error is:


"File "c:\Users\...", line 22, in Gefährdungserkennung.
torso = mesh.Mesh.from_file('filename.stl')
File "C:\RoboDK\Python37\lib\site-packages\stl\stl.py", line 376, in from_file
with open(filename, 'rb') as fh:
FileNotFoundError: [Errno 2] No such file or directory: 'filename.stl'.


The spelling of the filename is correct and the location of the filename is in the same folder as the .py program. Numpy-stl was installed successfully.


Do you have any idea why this doesn't work with mesh.Mesh.from_file? Or any alternatives?
I would be very pleased to receive an answer.


With kind regards

奥立


The code of the subroutine is copied and pasted as .txt below in the attachment.

[奥立ndo]

Here is the code of the subroutine as .txt below in the attachment.

[Sam]

Hello!

There are a few things you can check.

• Ensure your working directory is at the file level: os.getcwd()
  
• Ensure you have read access: os.access('filename.stl', os.R_OK)
  

[奥立ndo]

Hello Sam,

first of all, thank you very much for your quick response! I accidentally found out what caused the error. The problem was that if I use the following copied path: torso = mesh.Mesh.from_file('C:/Users/username/Desktop/Projects/RoboDK/filename.stl') with a capital C at the beginning ('C:/..) like i did, the Errno2 error appears. If I use ('c:/User...) with a lowercase c at the beginning, it works! My bad.

best regards from Germany

奥立

[Sam]

Glad to know you resolved this issue!