+- RoboDK Forum (//www.sinclairbody.com/forum)
+-- Forum: RoboDK (EN) (//www.sinclairbody.com/forum/Forum-RoboDK-EN)
+ - - -论坛: General questions about RoboDK (//www.sinclairbody.com/forum/Forum-General-questions-about-RoboDK)
+--- Thread: Milling issue with bobcamcad and robodk (/Thread-Milling-issue-with-bobcamcad-and-robodk)
bobcamcad和robodk铣削问题-clood-04-01-2023
Hi everybody
Recently we try to operate iuka robot with a turn table for milling so after getting throw all the videos and the documentation available in the enternet i manag to add my setup in robodk environment
I chose to work with bobcadcam for the toolpath generation but after loading the part and the toolpath to robo dk nothing worked as i expected everything becomes in red (coll..unreachable...) besides the long time robodk take for processing the milling cod that bobcamcam generat
I'm stuck in this piont i don't know how to minimize the time to process my milling
Is it possible if i change my cam software i could find better results
RE: Milling issue with bobcamcad and robodk-Sergei-04-03-2023
Could you please share your station so that we can have a look at it?
If you don't want to place your station here, you can send a request to info@www.sinclairbody.com.