+- RoboDK Forum (//www.sinclairbody.com/forum)
+-- Forum: RoboDK (EN) (//www.sinclairbody.com/forum/Forum-RoboDK-EN)
+--- Forum: General questions about RoboDK (//www.sinclairbody.com/forum/Forum-General-questions-about-RoboDK)
+--- Thread: Low speed when loading giant parts (/Thread-Low-speed-when-loading-giant-parts)
Low speed when loading giant parts-jerry.chen-03-08-2023
Dear RoboDK Team:
I just created a giant tube(D=3400mm) and loaded it in RoboDK.
But when I selected the part, plenty of arrows were shown and this dramatically slowed the speed of view-changing with mouse. Is there any tip to resolve this?
I'm appreciated for your reply.
Jerry
RE: Low speed when loading giant parts-Alex-03-08-2023
Did you import a STEP file or did you use a CAD Plugin?
It seems like the plane was imported as a curve. Make sure you have this setting disabled before importing:
You can reach this menu by going into:
Tools⮕Options in the CAD tab.
Alternatively you can split the object and delete the curves manually.
Feel free to attach your station and I can help you with it.
RE: Low speed when loading giant parts-jerry.chen-03-09-2023
(03-08-2023, 05:00 PM)Alex Wrote:Did you import a STEP file or did you use a CAD Plugin?
It seems like the plane was imported as a curve. Make sure you have this setting disabled before importing:
You can reach this menu by going into:
Tools⮕Options in the CAD tab.
Alternatively you can split the object and delete the curves manually.
Feel free to attach your station and I can help you with it.
Thank you for your reply.
I have disabled the setting and reload it agian, but nothing helps.
相反,我可以删除你嘴尖飞机ed with "right click -> split object " function.
The station is also attached in case you want to investigate it.
Anyway, the problem is resolved. Thank you again :)