PROBLEM WITH POST PROCESSOR MOTOMAN PRINT 3D可打印版本 +- RoboDK Forum (//www.sinclairbody.com/forum) +-- Forum: RoboDK (EN) (//www.sinclairbody.com/forum/Forum-RoboDK-EN) + - - -论坛:RoboDK错误(//www.sinclairbody.com/forum/Forum-RoboDK-bugs) +--- Thread: PROBLEM WITH POST PROCESSOR MOTOMAN PRINT 3D (/Thread-PROBLEM-WITH-POST-PROCESSOR-MOTOMAN-PRINT-3D)

PROBLEM WITH POST PROCESSOR MOTOMAN PRINT 3D-2m3d-03-20-2019 problem with post processor I am working with one MOTOMAN robot. I have changed the post processor as suggested, but i am receiving an error: 'Robotpost' object has found no attribute 'SPEED_MMS" whats is wrong? RE: PROBLEM WITH POST PROCESSOR MOTOMAN PRINT 3D-Jeremy-03-21-2019 Hi 2m3d, It seems like you are not giving speed value to the post processor. Does the GCode you used for your 3D printing project contain speed instructions? Have a good day. Jeremy RE: PROBLEM WITH POST PROCESSOR MOTOMAN PRINT 3D-2m3d-03-21-2019 Hello Jeremy Thanks for the answer. But i have speeds set on the slicer and there are speed instruction on the robot DK program. Please see the attached The speed could be wrong but they are there can it be just a problem of positioning the changes on the post processor? where exactly should i copy the instructions that must be before the MOVL instruction I have put it right before the MOVL instruction please see the attached