+- RoboDK Forum (//www.sinclairbody.com/forum)
+-- Forum: RoboDK (EN) (//www.sinclairbody.com/forum/Forum-RoboDK-EN)
+--- Forum: Request new features (//www.sinclairbody.com/forum/Forum-Request-new-features)
+--- Thread: STEP and IGES files import in Linux (/Thread-STEP-and-IGES-files-import-in-Linux)
STEP and IGES files import in Linux-enrico.villagrossi-06-30-2021
Dear RoboDK team,
is it foreseen the support to STEP and IGES formats in RoboDK installed under all the OS (in my case Linux)?
Thank you.
Regards,
Enrico
RE: STEP and IGES files import in Linux-Vineet-06-30-2021
Hello,
You can open your file in Windows, save it as an .sld and load them on Linux.
Or you can use the .stl format which is supported by Linux. (this will be without colours)
RE: STEP and IGES files import in Linux-enrico.villagrossi-07-01-2021
Hello,
thank you for the reply, currently, I don't have a windows machine, of course, I'm using the .stl as the only viable format to share 3D models between CAD and RoboDK, I was wondering why .step and .iges are not supported in Linux, I would expect the same features between RoboDK in Windows and Linux.
Thank you.
Regards,
Enrico