+- RoboDK Forum (//www.sinclairbody.com/forum)
+-- Forum: RoboDK (EN) (//www.sinclairbody.com/forum/Forum-RoboDK-EN)
+--- Forum: RoboDK API (//www.sinclairbody.com/forum/Forum-RoboDK-API)
+--- Thread: How to solve IK for a given TCP (/Thread-How-to-solve-IK-for-a-given-TCP)
How to solve IK for a given TCP-hoolymama-06-14-2018
Hi,
I would like to use the API to find all joint configurations that will move the TCP to a target. If I use SolveIK() or SolveIK_All() the resulting joints put the flange at the target. Any ideas welcome.
Or maybe there's a better way to do what I'm trying to do, so I'll explain.. I have a series of matrices describing a tool path. The robot can get to t1, t2, t3 but can't get to t4 from t3 with a linear move using the configuration it was using for t1 - t3 (I guess the preferred configuration). So I need to find a configuration that is valid for all matrices. For example, if I start the robot with the elbow down, and then do MoveL for each pose, it works. I need to figure out what that configuration is, using the API, before the robot starts the move.
Thanks
julian