Extracting stp or igs files from RoboDK——革命制度党ntable Version +- RoboDK Forum (//www.sinclairbody.com/forum) +-- Forum: RoboDK (EN) (//www.sinclairbody.com/forum/Forum-RoboDK-EN) + - - -论坛:通用RoboDK问题(//www.sinclairbody.com/forum/Forum-General-questions-about-RoboDK) +--- Thread: Extracting stp or igs files from RoboDK (/Thread-Extracting-stp-or-igs-files-from-RoboDK) |
Extracting stp or igs files from RoboDK-DKeretic-01-07-2021 Is it possible to extract files back from RoboDK station to the step or iges format? And not only objects but for example mechanisms or robots? Thank You RE: Extracting stp or igs files from RoboDK-Olivier-01-07-2021 Hi DKeretic, You can save robots or mechanisms as .robot, readable with roboDK. At the moment, you can only export objects from RoboDK in .stl or .sld, however if you have SolidWorks you can open the .stl and re-save as step if needed. Olivier RE: Extracting stp or igs files from RoboDK-paulesp218-03-03-2021 (01-07-2021, 03:31 PM)Olivier Wrote:Hi DKeretic, HI, i need to export robot in some positions in .stl. I did the next. Select robot Right click Save as Change the name to robot.stl press OK But, when I imported the robot.stl into Solidworks, I don't have nothing How is the correct way to export robots? RE: Extracting stp or igs files from RoboDK-Jeremy-03-03-2021 Hi Paul, I don't think you can do that with the robots. Jeremy |