+- RoboDK Forum (//www.sinclairbody.com/forum)
+-- Forum: RoboDK (EN) (//www.sinclairbody.com/forum/Forum-RoboDK-EN)
+--- Forum: General questions about RoboDK (//www.sinclairbody.com/forum/Forum-General-questions-about-RoboDK)
+--- Thread: How to create a mechanism on a three-axis rotating device. (/Thread-How-to-create-a-mechanism-on-a-three-axis-rotating-device)
How to create a mechanism on a three-axis rotating device.-Clecio arc-10-23-2020
Olá Albert, Jeremy,
I'm starting to install a virtual cell but I can't find examples to create mechanisms on a rotary table with three axes, follow the part already done, could you help me to configure this cell?
Taking advantage of the help, how do I accurately configure the measurements between each cell element? I ask why when I fear between the elements I don't get the value I need, is there a way to measure the distance between the elements?
Thank you
RE: How to create a mechanism on a three-axis rotating device.-Jeremy-10-23-2020
Hi there.
你能附上一张照片的机制吗trying to build?
Jeremy
RE: How to create a mechanism on a three-axis rotating device.-Clecio arc-10-23-2020
Of course yes.
This photo is saved on my phone, if you need another one with more details I can send it later.
Clecio
RE: How to create a mechanism on a three-axis rotating device.-Jeremy-10-23-2020
Hi Clerio,
Feris wheels are not yet supported as a single mechanism, but you can create one using 3 separate rotative axes.
I would also recommend you to drop a post in the "Request features" section of the forum if you think it could be a nice upgrade to RoboDK.
Jeremy