+- RoboDK Forum (//www.sinclairbody.com/forum)
+-- Forum: RoboDK (EN) (//www.sinclairbody.com/forum/Forum-RoboDK-EN)
+ - - -论坛:一般问题ns about RoboDK (//www.sinclairbody.com/forum/Forum-General-questions-about-RoboDK)
+--- Thread: Simulation stutter/problem (/Thread-Simulation-stutter-problem)
Simulation stutter/problem-AndersR-05-25-2020
Hey Guys!
First of all thank you for this awesome program, I am slowly starting to see the huge opportunities that lies withinh.
I am doing a simulation of palletizing, and I tried to follow the guide of the pick&place webinar that lies on youtube. But even though i tried to follow the webinar very carefully, I experience stutter on my conveyor. As if the processing power within the program or my computer isnt enough.
You guys have any advice? I linked a video of the program running.
https://drive.google.com/open?id=1-Mp8_I9bppF3ls1lkv5mFJ8LpS_O9MSX
Regards AndersR.
RE: Simulation stutter/problem-Albert-05-25-2020
Hi Anders,
Thank you for your feedback. I'm not sure what can be causing this issue.
Are you using the conveyor as a mechanism or simulating it with Python?
Can you share your RDK project file? We may be able to help you better.
Albert
RE: Simulation stutter/problem-AndersR-05-26-2020
(05-25-2020,远点)Albert Wrote:Hi Anders,
Thank you for your feedback. I'm not sure what can be causing this issue.
Are you using the conveyor as a mechanism or simulating it with Python?
Can you share your RDK project file? We may be able to help you better.
Albert
Hi Albert, thx for your reply.
I just used the simulation found in objects, should I try the other one?
I linked linked my project file:)
Anders.
RE: Simulation stutter/problem-AndersR-05-26-2020
(05-26-2020, 06:11 AM)AndersR Wrote:(05-25-2020,远点)Albert Wrote:Hi Anders,
Thank you for your feedback. I'm not sure what can be causing this issue.
Are you using the conveyor as a mechanism or simulating it with Python?
Can you share your RDK project file? We may be able to help you better.
Albert
Hi Albert, thx for your reply.
I just used the simulation found in objects, should I try the other one?
I linked linked my project file:)
Setup_tm14.rdk(Size: 6.56 MB / Downloads: 471)
Anders.
RE: Simulation stutter/problem-AndersR-05-27-2020
I have managed to find a work around it. Instead of using the simulation model that is provided in objects, I used the mechanism. Made a linear movement with a reference frame that moves and then just place my objects within this frame :)
No need to look further into it. Thx though.
RE: Simulation stutter/problem-Jeremy-06-01-2020
Hi AndersR,
In the Pick and Place webinar, I was using the Mechanism Conveyor as it's less power-hungry. The python one's start to be quite heavy as soon as you have 3-4 objects on the conveyor.
Jeremy