+- RoboDK Forum (//www.sinclairbody.com/forum)
+-- Forum: RoboDK (EN) (//www.sinclairbody.com/forum/Forum-RoboDK-EN)
+ -论坛:一般RoboDK质疑(//www.sinclairbody.com/forum/Forum-General-questions-about-RoboDK)
+--- Thread: Robodk and Robot connecting issue (/Thread-Robodk-and-Robot-connecting-issue)
Robodk and Robot connecting issue-samieb-02-28-2020
Hello,
I have a problem with Robodk and robot (Fanuc LR mate 200id/7l) communication.
they can ping each other but cannot connect.
also I did what is in this part ://www.sinclairbody.com/doc/en/Robots-Fanuc.html#DriverFanuc
but in step "d.Select Shift-Reset and Shift-Forward to start the program" I do not receive any message or progress on teach pendant.
Would you mind giving me a clue?
thanks in advance
RE: Robodk and Robot connecting issue-Albert-03-02-2020
There are probably 2 or more physical Ethernet connectors in the Fanuc robot controller. I recommend you to connect to the correct one. If you are not sure you can try both.
I would also recommend you to turn off your firewall (and antivirus if you have) while troubleshooting.