Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Working with Fanuc F200iB

#1
Hi,

I am using Fanuc F200iB for my project and I use the robot from RoboDK's library. I have two questions:

Question 1: As shown in the attached picture (Question_1.jpeg), we see that the origin is not placed in the surface of the base frame. So, my question is how can we know the gap in Z direction between the origin and the surface of the base frame?

Question 2: Sometime when I make a new project and download the robot Fanuc F200iB in, it seems like the robot configuration is "collapsed", as shown in (Question_2.jpeg). How can I fix it?

Thank you very much.


Attached Files Thumbnail(s)

#2
This issue has been recently fixed. I recommend you to take the latest version of RoboDK and download the latest version of the robot attached.

.robot Fanuc-F-200iB.robot(Size: 649.36 KB / Downloads: 346)

Please note that hexapods are partially supported in RoboDK for the moment.
#3
Thank you very much Albert,

I am using the latest version and will let you know the results.

Best regards,

Minh-Nha




Users browsing this thread:
1 Guest(s)