Posts: 11
Threads: 1
Joined: Oct 2020
Reputation:
0
Hi
I just download Tryal Robodk and find fantastic if I could insert in the robot library my robot. It is a robot that I developed in Solidworks, 5 step motors, for small Companies that can not paying for professional robots.
If I can insert my robot in Robodk, I will buy the license. Can I?
Posts: 1,832
Threads: 2
Joined: Oct 2018
Reputation:
72
Hi Edgardkm,
I would need to take a look at, at least, a 2D sketch of the robot to tell you if it's possible or not.
Can you link that here?
Jeremy
Posts: 11
Threads: 1
Joined: Oct 2020
Reputation:
0
Can you give an email to send you the 2D design?
Thanks
Edgard
Posts: 1,832
Threads: 2
Joined: Oct 2018
Reputation:
72
Hi Edgar,
I was in CC of the last email you received from us.
Use this email address to send me the 2D sketch.
Jeremy
Posts: 11
Threads: 1
Joined: Oct 2020
Reputation:
0
Hi Jeremy
I already sent 2D drawing to Danielle. Any question about the robot just let me know, please.
Edgard
Posts: 11
Threads: 1
Joined: Oct 2020
Reputation:
0
Hi Jeremy
Any news about my robot?
Edgard
Posts: 1,832
Threads: 2
Joined: Oct 2018
Reputation:
72
Hi Edgard,
What exactly is your goal here?
Looking at the 2D sketch, this looks more like a hobbyist robot than anything professional.
As we do not have a Wizzard for 5 axis robots, we need to set up the kinematic in the background. Does it make any sense from a business standpoint to add that to our library?
Jeremy
Posts: 11
Threads: 1
Joined: Oct 2020
Reputation:
0
Hi Jeremy
I know the robot looks like a hobbyist robot, but works good and can make a lots of simple tasks we have in small Companies. Small Companies will never buy a professional robot like Kuka or ABB. I would like to add this robot only in the software we will buy, not in your regular library. I have this robot made in Solidworks and if you help us to add in our RobotDK, that we will buy, will be very nice. I already have some robots asked for some small Companies. None Robot Company is helping these small Companies.
Please, think carefully if you can help us.
Thank you
Edgard
Posts: 1,832
Threads: 2
Joined: Oct 2018
Reputation:
72
10-29-2020, 07:55 PM
(This post was last modified: 10-29-2020, 07:56 PM byJeremy.)
Hi Edgar,
I'll forward the information to the right person, but I can't guarantee anything.
与此同时,如果你can send us the 3D model (step) of the robot, that would be helpful.
we also need the measurement to build the DH table.
Jeremy
Posts: 11
Threads: 1
Joined: Oct 2020
Reputation:
0
Hi Jeremy
I will do that.
Thank you
Edgard
