[mamara]

Hi,

我连接RoboDK V5.2.4 Meca500 R3 v8.1.9, when running a simulation only on RoboDK, everything is good, when running the same program on robot (right click Run on robot), the real robot is moving good but the robot in the simulation is doing weird moves, and some times, I get message errors like singularity or no path possible because the robot in the simulation is not able to reach the position,

Do you have any suggestion about this issue ?

Best regards

[Jeremy]

Can you provide some screenshots or recordings of the issue?

[mamara]

Can you provide some screenshots or recordings of the issue?

Hi, you can find attached a screen recording of the issue

Do you have an idea what could be the issue?

Best regards

[Albert]

This issue should have been fixed a few months ago. I recommend you to update RoboDK to the latest version:
//www.sinclairbody.com/download

[mamara]

This issue should have been fixed a few months ago. I recommend you to update RoboDK to the latest version:
//www.sinclairbody.com/download

Thank you very much Albert, this fixed my issue, every thing is running correctly