[”]

Hello Team
Have you had any feedback on connecting a DOBOtCR5with robodk?
If so, do you have the procedure for connecting or transferring the program
Thanks in advance
Ned

[Jeremy]

Hi Ned,

There is a DobotDriver in the folder "C:/RoboDK/api/Robot.
This means that it should be possible to connect to the robot.

I personally never tried it with a Dobot, but for other brands it's pretty much as simple as:
1- Right-click the robot -> "Connect to the robot".
2- Enter the right IP address and verify if you can "ping" the controller.**
3- Then "Connect".

**But the Dobot seems to be using a COM port (COM4) by default and not Ethernet IP.

Did you try that?
Jeremy

[”]

Hello Jeremy Sorry for the delay in my response we will test the support this week
Thank you
Ned

[”]

Hello Jeremy
We manage to get a connection with theCR5DOBOT robot. But we are unable to move or transfer the program to the robot.
Can we organize a videoconference to help us ?
Thanks
Ned

[Jeremy]

I'm already fully booked this week.

You can send me an email directly for more support.

Jeremy

[nithinpanand]

Hello Ned, Hello Jeremy,

你能解释你如何建立connec吗tion to DobotCR5robot? Which port did you used? Should we need to set the Remote Control mode to "TCP/IP Secondary Development" in the Dobot Studio? Can Dobot Studio run in background while using robodk?

I am having issues (//www.sinclairbody.com/forum/Thread-Connecti...-CR5-robot) with DobotCR5connection, and unfortunately I also don't find any documentation regarding this anywhere in internet.

Could anyone guide me?