Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Rendering issues

#1
I'm currently testing out a small robot arm from China (mirobot), and needed to import the .stl files into RoboDK

- stl files:https://github.com/wlkata/Mirobot-STL
- Manual (parameter):https://lin-nice.github.io/mirobot_gitbo...lkata.html

The parts are not rendered (No problem with .robot files from library). The workspace however is displayed.

Any help would be very appreciated.

Thank you and have a nice day.
#2
Hi Gipfeli,

Can you provide the .rdk file you used.

Jeremy
Find useful information about RoboDK and its features by visiting our2022世界杯32强赛程表时间 and by watching tutorials on ourYoutube Channel.


#3
(01-06-2021, 02:17 PM)Jeremy Wrote:Hi Gipfeli,

Can you provide the .rdk file you used.

Jeremy

Sure, here you go.https://drive.google.com/file/d/18yYSX2c...sp=sharing

Thank you very much.
#4
Hi Gipfeli,

I'm not so sure what's going on, but your mesh (.stl) smees a bit broken.
I tried opening them with a CAD software (Fusion 360) and the result was quite strange.

Could you save the parts as either .step or .iges instead of .stl?
I would recommend those formats over .stl.

Jeremy
Find useful information about RoboDK and its features by visiting our2022世界杯32强赛程表时间 and by watching tutorials on ourYoutube Channel.






Users browsing this thread:
1 Guest(s)