[SamS]

Hello everyone,

我想模拟一个simple 5-axis CNC-machine with 3 axis on the machine (X,Y,RX) and 2 on a turntable (Z, RZ). My goal is to program a simple CAM path created with Fusion 360. I'm able to synchronize the machine with the turntable, but whenever calculating trajectories for the machining project, I get an error stating that the robot cannot reach all targets in its path. It seems that the robot is not properly optimizing the use of Z axis. If possible I'd like the configuration this way. The RX in the machine is not that important at the moment

I have tried several robot models in combination (including modeling the Z and RZ separately) and all the preset external axis optimization parameters with no luck. Modeling the Z axis into the machine (leaving RZ to the turntable) works, but feels kind of like cheating.

Please find the attached project.


Any help is much appreciated. Thank you in advance.

[Jeremy]

Hi SamS,

I don't think you will be able to achieve any interesting results using RDK for a setup like yours.
Our external axis optimization feature was really built toward a 6-axis robot installed on a linear rail or hooked to a turn table.

@Albert: Any thoughts on that?

Jeremy