Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Failed to generate program using "Universal Robots" post-processor!
#1
Hi, I understand that there are few threads around different subsets of the same issue but I couldn't find one that's related to the problem I am seeing.

I've attached the snapshots of error, python settings and the RDK as well. Looks like there is a problem around moveC command and I am not sure what exactly it means when it says"AttributeError: NoneType object has no attribute size."

When I run the program simulation on RoboDK it performs exactly as intended so there is definitely nothing wrong with the logic as far as I can understand. It's the generation of script where the issue lies at - I think. Can someone help me with this please. Thanks.


Attached Files Thumbnail(s)


.rdk Calibration.rdk(Size: 3.97 MB / Downloads: 122)
#2
国际空间站ue is that MoveC does not really work with Joint targets. If you change the targets to Cartesian targets it should work fine.
#3
(06-23-2022, 06:59 PM)Alex Wrote:国际空间站ue is that MoveC does not really work with Joint targets. If you change the targets to Cartesian targets it should work fine.

Hi Alex, thanks for the reply. I changed the targets to cartesian and the program generates fine. But when I run it on the actual robot, it moves in a straight line between the 2 ends of the arc and not along a curve (it's almost like it does a moveL between Points 1 and 3 and skips Point 2. So now instead of 3 arcs, I am getting 3 linear moves. The simulation however works fine. Any help on this is appreciated.




Users browsing this thread:
1 Guest(s)