Hi,
I exported a GCODE using Powermill 2021 and I imported it in RoboDK as "Machining Project" with a Kuka robot. The target angles in the RoboDK program are not equal to the original ones, as u can see in the pictures attached.
Original GCODE:
RoboDK imported Movel:
Which is the reason of this difference?
Thank you so much.
I exported a GCODE using Powermill 2021 and I imported it in RoboDK as "Machining Project" with a Kuka robot. The target angles in the RoboDK program are not equal to the original ones, as u can see in the pictures attached.
Original GCODE:
RoboDK imported Movel:
Which is the reason of this difference?
Thank you so much.