[danield271]

I'm doing a simulation using a python conveyor. When I run the "RunConveyor" script you can observe a constant movement of the parts placed on the conveyor ,which is good, but as soon as you move your mouse or a robot starts doing a movement at the same time, you can notice that the parts are not doing anymore a constant movement on the conveyor (delay in the movement). How can I solve this situation?

[AndersR]

Hello Daniel. I am not an expert, but it sounds like a problem i once had.
Check this out:
//www.sinclairbody.com/forum/Thread-Simulati...ht=stutter

[danield271]

Hello Daniel. I am not an expert, but it sounds like a problem i once had.
Check this out:
//www.sinclairbody.com/forum/Thread-Simulati...ht=stutter

Thanks @AndersR对你的帮助。最后我使用其它输送机(Mechanism) since this one doesn't freeze at all but it's still sad that you cannot use the python conveyor because of the freezing problem.

[AndersR]

Worked for me as well, and i found learning how to make mechanisms is very usefull for making own robots or items moving during simulation.

Good luck with the project :)

[Jeremy]

You are right AnderS,

I personally use mechanisms everywhere in my simulations. Most of the time, no one could tell that I did. I even simulated an AGV with an XY mechanism, I was able to make it move around the station to bring things.
I do the same for part stacks, clamps, and much more.

Jeremy